Now environment variable overrides no longer infect the build scripts.
_toolchain.overrides is dropped as probably misguided in the first place.
Fixes#251.
This change achieves two related goals.
First, default_rst is no longer assumed to be synchronous to
default_clk, which is the safer option, since it can be connected to
e.g. buttons on some evaluation boards.
Second, since the power-on / configuration reset is inherently
asynchronous to any user clock, the default create_missing_domain()
behavior is to use a reset synchronizer with `0` as input. Since,
like all reset synchronizers, it uses Signal(reset=1) for its
synchronization stages, after power-on reset it keeps its subordinate
clock domain in reset, and releases it after fabric flops start
toggling.
The latter change is helpful to architectures that lack an end-of-
configuration signal, i.e. most of them. ECP5 was already using
a similar scheme (and is not changed here). Xilinx devices with EOS
use EOS to drive a BUFGMUX, which is more efficient than using
a global reset when the design does not need one; Xilinx devices
without EOS use the new scheme. iCE40 requires a post-configuration
timer because of BRAM silicon bug, and was changed to add a reset
synchronizer if user clock is provided.
Although useful for debugging, most external tools often complain
about such attributes (with notable exception of Vivado). As such,
it is better to emit Verilog with these attributes into a separate
file such as `design.debug.v` and only emit the attributes that were
explicitly placed by the user to `design.v`.
This still leaves the (*init*) attribute. See #220 for details.
Right now an array is expected in any _opts overrides, and if it is
actually a string (because it is passed via an environment variable,
usually), awkwardness results as each character is joined with ` `.
Fixes#130.
This adds the Clock() build DSL element, and adds a resource manager
function add_clock_constraint() that takes a Pin or a Signal.
Note that not all platforms, in particular not any nextpnr platforms
at the moment, can add constraints on arbitrary signals.
Fixes#86.
Right now the device name in the board file is just the option
nextpnr uses, but that's overnormalized and doesn't quite match
the chip names used elsewhere. It is even worse for ECP5 in terms
of mismatch with chip names, and for ECP5 we need to support other
toolchains as well, so let's handle this uniformly everywhere.
The iCE40 programmers are also moved, since they're board-specific.
(It looks like iceprog isn't, but it only works with Lattice
evaluation kits.)
Fixes#80.
2019-06-04 09:52:33 +00:00
Renamed from nmigen/vendor/fpga/lattice_ice40.py (Browse further)
