For unknown reasons, Quartus treats {foo} and "foo" in completely
different ways, which is not true for normal Tcl code; specifically,
it preserves the braces if they are used. Because of this, since
commit 6cee2804, the vendor.intel package was completely broken.
In commit 892cff05, `-decimal` was used when writing Verilog for
Vivado targets because it treats (* keep=32'd1 *) and (* keep=1 *)
differently in violation of Verilog LRM. However, it is possible
to avoid that workaround by using (* keep="TRUE" *). Do that,
and remove `-decimal` to avoid special-casing 32-bit constants.
Refs #373.
If the clock signal is not a top-level port and has aliases, it can
be optimized out, and then the constraint will no longer apply.
To prevent this, make sure the constrained signal is preferred over
any aliases by using the `keep` attribute.
Vivado does not parse attributes like (* keep = 32'd1 *) as valid
even though, AFAICT, they are equivalent to (* keep = 1 *) or simply
(* keep *) per IEEE 1364. To work around this, use the solution we
currently use for Quartus, which is `write_verilog -decimal`.
Fixes#373.
Before this commit, there was only occasional quoting of some names
used in any Tcl files. (I'm not sure what I was thinking.)
After this commit, any substs that may include Tcl special characters
are escaped. This does not include build names (which are explicitly
restricted to ASCII to avoid this problem), or attribute names (which
are chosen from a predefined set). Ideally we'd use a more principled
approach but Jinja2 does not support custom escaping mechanisms.
Note that Vivado restricts clock names to a more restrictive set that
forbids using Tcl special characters even when escaped.
Fixes#375.
nextpnr now supports -12k; which replaces the use of -25k and --idcode
together to build bitstreams compatible with -12F devices. Use this.
This also removes the LFEUM-12K and its 5G counterpart; as per Dave Shah
they're currently only theoretical FPGAs.
By default, if an operation produces an undefined value (a Jinja2
concept that corresponds to Python's KeyError, AttributeError, etc)
then this value may be printed in a template, which is a nop. This
behavior can hide bugs.
This commit changes the Jinja2 behavior to raise an error instead of
producing an undefined value in all cases. (We produce undefined
values deliberately in a few places. Those are unaffected; it is OK
to use several kinds of undefined values in one Jinja2 environment.)
Fixes#337.
In some cases, it is necessary to synchronize a reset-like signal but
a new clock domain is not desirable. To address these cases, extract
the implementation of ResetSynchronizer into AsyncFFSynchronizer,
and replace ResetSynchronizer with a thin wrapper around it.
For most toolchains, these are functionally identical, although ports
tend to work a bit better, being the common case. For Vivado, though,
it is necessary to place them on the port because its timing analyzer
considers input buffer delay.
Fixes#301.
Now environment variable overrides no longer infect the build scripts.
_toolchain.overrides is dropped as probably misguided in the first place.
Fixes#251.
This change achieves two related goals.
First, default_rst is no longer assumed to be synchronous to
default_clk, which is the safer option, since it can be connected to
e.g. buttons on some evaluation boards.
Second, since the power-on / configuration reset is inherently
asynchronous to any user clock, the default create_missing_domain()
behavior is to use a reset synchronizer with `0` as input. Since,
like all reset synchronizers, it uses Signal(reset=1) for its
synchronization stages, after power-on reset it keeps its subordinate
clock domain in reset, and releases it after fabric flops start
toggling.
The latter change is helpful to architectures that lack an end-of-
configuration signal, i.e. most of them. ECP5 was already using
a similar scheme (and is not changed here). Xilinx devices with EOS
use EOS to drive a BUFGMUX, which is more efficient than using
a global reset when the design does not need one; Xilinx devices
without EOS use the new scheme. iCE40 requires a post-configuration
timer because of BRAM silicon bug, and was changed to add a reset
synchronizer if user clock is provided.
Although useful for debugging, most external tools often complain
about such attributes (with notable exception of Vivado). As such,
it is better to emit Verilog with these attributes into a separate
file such as `design.debug.v` and only emit the attributes that were
explicitly placed by the user to `design.v`.
This still leaves the (*init*) attribute. See #220 for details.
Since we use hertz elsewhere, this provides for easy conversions.
Also, cast the delay to string before applying it in xilinx_7series,
to avoid stripping the fractional digits.
Closes#234.
It's not practical to detect tools within the toolchain environment
for various reasons, so just assume the tools are there if the user
says they are.
Before this commit, the tools would be searched outside the toolchain
environment, which of course would always fail for Vivado, ISE, etc.
